Can the user's face be covered while enrolling the face?
No, in both FaceStation 1 and 2, do not have objects obstructing the face (except glasses).
Below is the information found the help menu of BioStar 2:
Is FaceStation 2 supported in BioStar 1?
Unfortunately, no. It is not supported and there are no plans to implement it in BioStar 1.
Is FaceStation 1 compatible with BioStar 2?
No it cannot be used in BioStar 2.
Is FaceStation 1 templates compatible with BioStar 2?
No it cannot be used in BioStar 2 because the template size and algorithm are different.
What is the maximum number of users that can be stored in FaceStation 2?
You can also use group matching to increase the maximum 1:n users to 5000 (but you have to press your group before matching).
Refer to the article below:
How does the face matching algorithm work? What is special about FaceStation 2?
Does FaceStation 2 support server matching?
No it is not supported (FaceStation 1 does not support server matching in BioStar 1 as well).
Where can I find the marketing materials (video, brochure, etc.)?
You can find it at our homepage download center
Can I connect to FaceStation 2 as a slave device to CoreStation?
Unfortunately no, it is not supported. It cannot be done through a simple customization project either.
What Wifi Security does the FaceStation 2 Wifi feature support?
Below items are supported with the wifi module
- WEP 64-bit and 128-bit encrytion with H/W TKIP processing
- WPA/WPA2 (Wi-Fi Protected Access)
- AES-CCMP hardware implementation as part of 802.11i security standard
How many slave devices can I connect to FaceStation 2?
If you're connecting a FaceStation 2 as a slave to a FaceStation 2 master, you can only add one.
For fingerprint devices you can add up to 7 devices.
For other non-fingerprint devices you can add 31 slave devices.
Refer to the attached installer guide manual page 17
On my FaceStation 2 I have 4000 users on the device but only 2000 users have face templates (1 per user). Can I still use 1:n mode?
Yes its still below the 3000 template threshold so you can use 1:n mode.
On my FaceStation 2 I have 3000 users with 1 face template each and I am using 1:n mode. What will happen if I add one more user with a face template?
The user will not be added through BioStar 2. If you try to force adding a user on the device such as USB import, authentication will not work for all users so please be cautious.