Wiegand

[BioStar 2] Wiegand reader output when using AoC(Access on Card), sample configuration using Suprema devices as wiegand input & output
In the latest firmware versions released since August 2018 ( starting with BioStation 2 and will be released so on), when scanning AoC(Access On Card) card,...
Thu, Aug 23, 2018 at 1:34 PM
[BioStar 2] Wiegand Reader Sample Configuration
When configuring a Wiegand read setup, one device will be the Wiegand input device (receiving the signal) and the other device will be the Wiegand output de...
Mon, Aug 27, 2018 at 2:06 PM
[BioStar 2] Troubleshooting Wiegand output issues
Issue 1.You are using Suprema devices as Wiegand readers for a 3rd party controller and the controller is not receiving any signal from the Suprema devi...
Tue, Mar 13, 2018 at 10:15 AM
[BioStar 2] Multiple Wiegand Format / Wiegand Input Configuration / Finding Card Format
A device can read multiple Wiegand formats in BioStar 2.3 and above. Refer to the administrator’s manual or below to know which firmware versions support t...
Mon, Aug 27, 2018 at 2:07 PM
[BioStar 2] Wiegand Legacy Mode for RFID readers in BioStar 2
In BioStar 1 there were two ways you could configure the RFID devices (Wiegand Readers) that were connected to a Suprema device.  Legacy: RF Reader will...
Thu, Apr 5, 2018 at 10:56 AM
[BioStar 2] Sending Out User ID Through Wiegand
Wiegand Mode in BioStar 1 has options to Select user or card ID for Wiegand input or output. However in BioStar 2, only the card ID can be output. The...
Fri, Jun 22, 2018 at 1:22 PM
[BioStar 2] Wiegand Configuration FAQ
Below are some answers to frequently asked Wiegand Configuration questions Which devices support Wiegand card read?  Prox and iClass cards are Wiegand ...
Wed, Jul 4, 2018 at 10:21 AM
[Both BioStar] Configuring the Same Wiegand Format of BioStar 1 in BioStar 2
The Wiegand configuration UI in BioStar 1 and 2 are different and may cause some confusion. If you would like to configure your Wiegand format in BioStar 1...
Tue, Jul 3, 2018 at 11:14 AM
[BioStar 2] Wiegand Bypass / Slave Device Wiegand
Below are answers to frequently asked questions regarding bypass mode.  What is the Wiegand Bypass feature?  Bypass is a Wiegand Output mode that is us...
Wed, Feb 28, 2018 at 2:23 PM
[BioStar 2] Configuring Pulse Width and Interval for Wiegand Input
Concept Wiegand input configuration refers to a setup where a 3rd party RF reader is connected to a Suprema device and the Suprema device receives a Wiegand...
Tue, Jul 10, 2018 at 1:17 PM