Suprema supports the Corporate 1000 Wiegand Format and an administrator is required to set up Wiegand setting to read the card. In this document, we would like to introduce guides for setting up Wiegand setting for 35 bit Corporate 1000 card.
Wiegand Format |
Step 1. Choose Custom Wiegand Format and click [Next].
Step 2. Type 35 to total bits and click [Apply]
Step 3. Click “E” for Even parity and select second bit. You can see E1 assigned to the 2nd bit.
Step 4. Click “O” for Odd parity and select 35th bit. You can see O2 assigned to the 35th bit. Select the 1st bit. You can see O3 assigned to the 1st bit.
Step 5: Click “I” for User ID and click from 14th bit to 34th bit. Click [Next].
Step 6: Click even parity part as the following deep orange color.
- Parity bit settings should look like below screenshot. (Click where red dots are indicated)
Step 7: Click [>>] button.
Step 8: Click odd parity part as the following deep purple color.
- Parity bit settings should look like below screenshot. (Click where red dots are indicated)
Step 9: Click [>>] button.
Step 10: Click odd parity part as the following deep blue color.
- If you properly select the odd parity part, you will see as the following. (Click where red dots are indicated)
Step 11: Click [Next] then [Finish] and save this configuration to the