Applied to BioEntry W2, BioEntry P2, XPass 2, XPass D2, XPass D2 (Rev 2), BioEntry R2


BioStar 2 Products which do not have a LCD, have an LED indicator to show the status of the device and request an action to users.



Product NameLocation of LED Indicator
BioEntry W2
BioEntry P2, BioEntry R2
XPass 2, XPass D2, XPass D2 (Rev 2)



Please check the supported FW information below with the changed LED color.


Product NameFW Version
BioEntry P2V1.4.0_200625 or higher 
BioEntry W2V1.5.0_200722 or higher 
XPass 2V1.1.0_190911 or higher 
XPass D2V1.3.0_200515 or higher
XPass D2 (Rev 2)V1.0.0_200429 or higher
BioEntry R2V1.4.0_200521 or higher

[FW and product name for the changed LED color feature]


<LED Indicator Color>
Indicates the operational status of the device with the color of the LED.
• Green solid: Authentication success
• Red solid: Authentication failure
• Blue/Sky blue blinking: Normal operation
• Blue/Green blinking: The IP address has not been received properly when using DHCP | It will also come out when the RS485 slave device is disconnected.
• Blue/Green blinking: When initializing network settings
• Green blinking: Waiting for an input



For your reference, please refer to the former LED indicator color if you have a old FW version.


<Former LED Indicator Color>
• Green solid: Authentication success
• Red solid: Authentication failure
• Blue/Sky blue blinking: Normal operation
• Blue/Yellow blinking: The IP address has not been received properly when using DHCP | It will also come out when the RS485 slave device is disconnected.
• Blue/Yellow blinking: When initializing network settings
• Yellow  blinking: Waiting for an input