Device Overview

The Airfob Patch and Tag devices upgrade existing access control readers or door locks to be compatible with Airfob Space mobile credentials.

  • Airfob Patch: Ideal for wired readers and intercoms, this energy-harvesting device attaches without the need for wiring.
  • Airfob Tag: Equipped with a coin cell battery, making it suitable for battery-powered devices like door locks.


Compatibility

Both devices work with Mifare 1K technology but are not compatible with 125 KHz "low frequency" readers or locks.


Functionality

These devices operate by reading the encrypted Bluetooth Airfob Space credential from a mobile phone and emulating a Mifare RFID signal. They attach to readers and locks using tape, requiring no wiring.


Configuration Steps

After installing your Tag or Patch and registering it with the Airfob Pro app, follow these steps to configure your device:

1. Access the App

  • Open the Airfob Pro app.
  • Log into the site where your Tag or Patch is registered.

2. Navigate to Device Settings

  • Tap Access Point on the menu bar.
  • Select Device to view a list of registered devices.
  • Choose the Patch or Tag you wish to configure.

3. Enable BLE Mode

  • Bring your phone close to the device.
  • Toggle on BLE Mode in the app.

4. Set Card ID Output Method

  • Scroll to Card ID Output Method and tap Edit.
  • Press Select next to User Card ID.

5. Choose the Output Method

  • None: Select this option if no card ID should be transmitted. This setting is useful for Time & Attendance (T&A) purposes to extend battery life.
  • Fixed Device: Transmits a constant, pre-programmed card ID. Useful for door locks or intercoms that require RFID cards to be programmed individually. The device log will only display this fixed card ID.
  • User Card ID: Transmits a unique card ID for each user, aligning with existing RFID card numbers in access control systems. This allows seamless integration without issuing new physical cards.
  • Direct Input: Manually specify the card ID to transmit. Useful for custom settings where a single ID must be used across multiple devices.

6. Save Your Settings

  • Confirm your selections by pressing Save while your phone is near the device.
  • A success message will confirm the update.


By following these steps, you can ensure that your Airfob devices are properly configured to meet your specific access control needs.