From BioStar 2 v2.9.11, SL1, SL3, and SL1/SL3 Mix Mode for MIFARE Plus EV1 card is supported.
- SL1: Compatible mode with MIFARE Classic
- SL3: Advanced security mode based on AES
- Relevant Article: [BioStar 2] BioStar 2.9.11 New Features and Configuration Guide
To use this function, you must match not only the BioStar 2 version, but also the firmware of the device to be used.
Please refer to the table below to check the firmware version when you use the MIFARE Plus EV1 Card SL1, SL3, and SL1/SL3 Mix Mode in BioStar 2.
| Device | Firmware | Device | Firmware |
| XPass D2 | v1.8.1 or above | XPass 2 | v1.4.3 or above |
* Devices not listed in the table will be updated with each firmware release.