If you're curious how much data is used to transfer user information, make a calculation of your basic user information and generated logs calculate how often it is transferred between the device and server.
48 Bytes (excluding image log)
36 Bytes (Used in user registration, KeepAlive, and all other packets)
KeepAlive packet is sent to the server every 30 seconds if there is no packet received from the server.
* Note: if there is no response regarding this Keepalive packet from the server for 10 seconds, the device considers the connection is lost and disconnects the TCP socket connection. Once the device is disconnected, it will attempt to reconnect again based on its thread schedule, not based on a specific delay of time.
Basic User Information: 60 Bytes (ID, valid period, ...)
Access Group Information : 4 * n Bytes (numOfGroups = max 16)
User Name: 192 Bytes
User Photo : 16 KBytes
User Personal Message : 128 Bytes
PIN : 32 Bytes
Job Code : 836 Bytes
Card Information: 34 * n Bytes (numOfCards = max 8)
Fingerprint Template: 772 * n Bytes (numOfFingers = max 10)
FaceStation 2/FaceLite Face Template : 106,632 * n Bytes (numOfFaces = max 5)
FaceStation F2 Face Template: 11,048*n Bytes (numOf F2 Face = max 2)
Approx total with all items above with 1 face, 2 fingerprints, 1 card, 4 access groups:
60 + (4 x 4) + 192 + 16384 + 128 + 32 + 836 + 34 + (772 x 2) + 106632 = 125858 Byte or 122.9 KB
User information is transferred based on what the device supports.
If the maximum size for a single packet (64bytes) is exceeded, the packet it split into multiple packets and reuses the header information.
When Job Code or Image Log is Requested from the Server
Log Header: 12 Bytes
Expanded Log Data: 8 + 12 Bytes
user ID Log Data: 8+32 Bytes
UID Log Data: 8+4 Bytes
IO Device Log Data: 8+1 Bytes
Job Code Log Data: 8+4 Bytes
Image Log Data: 8 + 16K Bytes
Approx total with all items above:
12 + 20 + 40 + 12 + 9 + 12 + 16392 = 16497 Byte or 16.1KB
This information will be added to the log information. If the maximum size for a single packet (64bytes) is exceeded, the packet it split into multiple packets.
Approximately 3000 logs occur per day and 300 image logs are created. The admin checks all image logs (server makes request for them).
Each user users have at least 1 face template, 2 fingerprints, 1 card, 4 access groups, and 200 users were transferred this day.
The data use of this day would be approximately
3000 log x 48 bytes = 144000 bytes
200 users x 125858 bytes = 25171600 bytes
300 x 16497 bytes = 4949100 bytes
Total = 30,264,700 bytes (excluding packet headers and keepalive packets) = 30.2 MB used