Applied to: v1.0.1_20210329 or above

BioStar v2.8.11 or above

Suprema X-Station 2 is a versatile intelligent terminal that supports RFID cards, Mobile Access as well as QR codes, offering the ultimate flexibility in terms of credential options and system design. Equipped with secure boot process, Open Supervised Device Protocol (OSDP) and a camera for image logs, X-Station 2 improves security while safeguarding user data. X-Station 2 is easy to install, use and maintain with features like Power over Ethernet (PoE), intuitive GUI on 4 inch wide touchscreen, and IP65 rating.

What’s new about X-Station 2?

1.  QR Code Support as a new user credential

Two types of QR & Barcode are available to use with X-Station 2 QR support models.

TypeBioStar 2 QRThird party QR/Barcode
Data GenerationGenerated by BioStar2 systemGenerated by third party system
- Only printable ASCII characters
- Maximum up to 32 characters

Other data types of third party QR & Barcode are not available to use. We are going to implement further.

2. Mobile Access Support

Suprema Mobile Access is available to use with X-Station 2.

[BioStar 2] How to Use Suprema Mobile Access

3. RFID Card Support

It supports both LF (125kHz) and HF (13.56MHz) RFID as well as various card types including EM, MIFARE, MIFARE Plus, iCLASS, DESFire and FeliCa.

4. Image Log & Face Detection Feature

Taking a picture based on the pre-defined event logs is supported. 

In addition, you can force to take the face picture of the user who is access granted.

5. POE Support

With a LAN cable and a PoE router,  X-Station 2 can have the power supply and the network connection at the same time.

6. Supported Model list

6-1) XS2-DPB and XS2-APB

  • Depending on the card type, the model type is divided.

6-2) XS2-QDPB and XS2-QAPB 

  •  XS2-QDP and XS2-QAPB support QR/Barcode scanning as user authentication.

6-3) XS2-ODPB and XS2-OAPB 

  • XS2-ODPB and XS2-OAPB have a Fingerprint sensor.

7. Others

Suprema devices firmware file is .bin file, but X-Station 2 firmware structure has been changed.

File extension of X-Stataton 2 FW  is .zip file.  Please do not unzip the file. 

What are the different things from other BioStar 2 products?


PoE (Power over Ethernet)

BioStar 2 QR

Third party QR/Barcode as Printable ASCII 

Not supported

Wireless LAN Connection

SIP-based VoIP server or an Analogue Interphone

Device Capacity

A&E Specification of X-Station 2

Click here

Product Info

Click here

New Product Instruction

[X-Station 2 Card and QR models]

[X-Station 2 Fingerprint model]