The custom smart card layout is supported on the following products once you match the correct version. If you would like to check what the custom smart card layout function is, please check the relevant article below.
- Relevant article
- BioStar 2 - [BioStar 2] How to Setup Custom Smart Card Layout
- Suprema Device Manager - [Device Manager] How to Use Custom Smart Card Layout
| Product | Version | Product | Version | |
| BioStar 2 | v2.9.4 or above | Suprema Device Manager | Android | v1.1.8 or above |
| iOS | v1.1.8 or above | |||
| XPass D2 | v1.7.1 or above | BioEntry P2 | v1.5.1 or above | |
| BioEntry W2 | v1.8.0 or above | BioStation 2a | v1.1.0 or above | |
| XPass 2 | v1.4.1 or above | X-Station 2 | v1.3.0 or above | |
| BioStation 3 | v1.3.0 or above | FaceStation F2 | v2.2.0 or above | |
| BioLite N2 | v1.6.2 or above | BioEntry W3 | v1.0.0 or above * Support Felica from v1.0.1 or above. | |
| CoreStation | v1.7.2 or above * Support Slave devices' Custom Smart Card feature. | CoreStation 20 | v1.0.1 or above * Support Slave devices' Custom Smart Card feature. | |
| XPass Q2 | v1.0.0 or above | BioStation 3 Max | v1.0.0 or above | |
* Starting with BioStar 2 v2.9.10, Custom Smart Card settings can be configured for a supported slave device even if the connected controller does not support the feature.