Technical Support | Suprema

• Firmware Repackaging

<New Features and Improvements>

1. Added new model.
   • XP2-MAPB (Suprema Official Website)
   • The XP2-MAPB Model is not available in the US, Canada, Australia and New Zealand.
2. Improved to select and update only the desired information when updating user information. (Compatible with BioStar v2.9.0 or higher)
3. Supports Custom Smart Card Layout.
   • Relevant Article: [BioStar 2] How to Setup Custom Smart Card Layout
4. XPass D2 new BLE (Bluetooth Low Energy) chip firmware (Build No. 1.7.0_220921) support. 
   • The BLE chip parts of the hardware have been changed, and the firmware has been upgraded to be compatible with both the existing and new BLE chips.
5. Improved synchronization to complete if user enrollment fails when synchronizing multiple users to the device in BioStar 2. 
6. Improved smartcard output byte order setting. 
   • When using Wiegand or OSDP output, it is improved to be affected by the smartcard output byte order when the Wiegand output information is set to send user ID.
   • Relevant Article: [BioStar 2] Supports Setting the Byte Order for Smart Cards

<New Features and Improvements>

1. Improved pop-up message displayed when searching with unenrolled information in the Search User feature.
2. Improved pop-up message displayed when Timed Anti PassBack occurs.
   • Relevant Article: [BioStar 2 v2.9.5 > BioStar 2 Administrator Guide > Feature Guide >How to Set Up the Timed Anti Passback]
   • 
3. Improved duplicate fingerprint detection.
4. Improved fingerprint capture quality.

<New Features and Improvements>

1. Extended the user expiration period to a maximum of ‘2037-12-31’.
   • Relevant Article: [BioStar 2] Introduction of Improved USER Menu
   • Relevant Article: [BioStar 2] Supported Product and Version List of User Expiration Period, '2037-12-31'
2. Supports Custom Smart Card Layout.
   • Relevant Article: [BioStar 2] How to Setup Custom Smart Card Layout
   • Relevant Article: [BioStar 2] Supported Product and Version List of Custom Smart Card
3. Supports the Display Result from Controller feature for displaying authentication success or failure results from a 3rd party controller on the device screen when using Intelligent Slave.
4. XPass D2 new BLE (Bluetooth Low Energy) chip firmware (Build No. 1.7.0_220921) support.
   • The BLE chip parts of the hardware have been changed, and the firmware has been upgraded to be compatible with both the existing and new BLE chips.
5. Supports the Ignore Repeated Signals Duration feature, which ignores repetitive authentication signals from the controller when the device is connected to a 3rd party controller via Wiegand.
6. Face Detection feature is deprecated.
7. Added event code for QR authentication.
8. Improved synchronization to complete if user enrollment fails when synchronizing multiple users to the device in BioStar 2.
9. Improved duplicate fingerprint detection.
10. Improved pop-up message displayed when moving to another screen after entering the license menu.