Technical Support | Suprema

<New Features>

1. Improved to distinguish devices that support the Secure Tamper feature.

2. Added a distinction code to support 7-byte CSN cards.

<New Features>

1. Reflects global cybersecurity standards and the latest security requirements.

2. Added identification code to support recognition of the latest cards.

   • DESFire EV3

3. Improved time synchronization behavior between server and devices.

4. Supports feature to set the baud rate of slave devices.

5. Improved to distinguish devices that support the Secure Tamper feature.

6. Supports the Ignore Repeated Signals Duration feature, which ignores repetitive authentication signals from the controller when the device is connected to a 3rd party controller via Wiegand.

7. Supports not logging events when the Ignore Repeated Signals Duration feature is activated.

8. Supports SL1, SL3, and SL1/SL3 Mix Mode for security level compatibility with MIFARE Plus EV1 cards.

   • SL1: Compatible mode with MIFARE Classic
   • SL3: Advanced security mode based on AES

9. Improved to not recognize SEOS configuration cards as CSN for 1 minute after device booting.

10. Improved so that when authentication is attempted on a door set to Manual Lock, an authentication failure event occurs and a locked message appears.

11. Supports real-time monitoring of the device's multiple statuses in BioStar X.

12. Improved compatibility to support accessing the detail page and changing settings for Master Admin supported devices connected as slaves.

<New Features>

1. Provided standard firmware for non-EU regions

   • Disabled the Master Admin and Admin 2-step Authentication features

   • Reduced the minimum length for PIN enrollment to 4 digits

• The above applies ONLY to devices shipped with version v1.3.1 or lower, and non-European devices shipped with version v1.4.2 or higher.
• For devices shipped with v1.4.0 or v1.4.1, the Master Admin, 2-step Authentication, and 8-character PIN will be retained even if upgraded to v1.4.2 or higher.

<New Features>

1. Supported EV2 Secure Messaging authentication and issuance for DESFire EV2 and EV3 cards.

2. Supports the Lock Override feature, which allows you to enroll a card that can open a door to be opened using a specific card.

<New Features>

1. Supported EV2 Secure Messaging authentication and issuance for DESFire EV2 and EV3 cards.

Relevant Article

• [Device] New Product Introduction - XPass Q2

Suprema Docs

• XPass Q2 Installation Guide

A&E Details

• XPass Q2 A&E Download