Device
Article Author: Krista Kim When connecting XPass D2 and CS-40 with RS-485 connection but using a separate power supply, please make sure that 485 TRXN(Y...
Wed, Sep 25, 2024 at 3:49 PM
From BioStar 2.8.16, you can use X-Station 2 as a slave device for CS-40. Please notice that you need to match the BioStar 2 and CS-40 firmware versions to ...
Wed, Sep 25, 2024 at 3:46 PM
ENCR-10 is enclosure for Suprema controller CS-40 and output module OM-120. One unit of CS-40 or 2 units of OM-120 can be equipped in ENCR-10. How to in...
Wed, Sep 25, 2024 at 3:44 PM
Article Author: Krista Kim All Suprema fingerprint devices can connect to CS-40 as a RS-485 slave device. Supported devices are BioStation A2, BioStatio...
Wed, Sep 25, 2024 at 3:10 PM
Author: Krista Kim, Sales Manager I Suprema Europe 1. CS-40 Network Reset and Factory Default Q1: How to reset the CS-40 network? A: Push th...
Wed, Sep 25, 2024 at 3:04 PM
The author of the article is Krista Kim who is in charge of CS-40 Sales. ------------ We would like to guide you on how we can replace the site where 3...
Wed, Sep 25, 2024 at 3:01 PM
Below is a sample CS-40 2 setup with 2 slave devices and 3 Wiegand Readers to control 5 doors. You can add each device as a separate door in the Door ...
Wed, Sep 25, 2024 at 2:58 PM
Maximum Devices Per Port CS-40 has 5 RS-485 ports and in total CS-40 supports maximum of 64 slave devices but each port supports up to 31 slave devices wit...
Wed, Sep 25, 2024 at 2:56 PM
Suprema's CS-40 raises the bar for ease of use and streamlined maintenance for an access controller. Discover in this video how you can easily manage ...
Wed, Sep 25, 2024 at 2:49 PM
The author of the article is Krista Kim who is in charge of CS-40 Sales. ------------------------- From CS-40 f/w version 1.3.1, you can access SETUP ...
Wed, Sep 25, 2024 at 2:46 PM