Wiegand

[BioStar 2] Sending Out User ID Through Wiegand
Wiegand Mode in BioStar 1 has options to Select user or card ID for Wiegand input or output. However in BioStar 2, only the card ID can be output. The...
Tue, Mar 24, 2020 at 8:58 AM
[BioStar 2] How to configure Suprema device and send Wiegand output from Suprema device to 3rd party ACU
Could we connect Suprema device to Access Control Unit through Wiegand? Could we use Wiegand of Suprema device to connect Access Control Unit? [Figur...
Sun, Feb 9, 2020 at 6:07 PM
[BioStar 2] Multiple Wiegand Format / Wiegand Input Configuration / Finding Card Format
A device can read multiple Wiegand formats in BioStar 2.3 and above. Refer to the administrator’s manual or below to know which firmware versions support t...
Wed, Oct 2, 2019 at 10:17 AM
[BioStar 2] How BioStar 2 truncates CSN and sends out to the Wiegand out
Some users would like to read the first bytes rather than last bytes. Let's assume that there's a number 04 3D3A 3277 3280 (HEX) but y...
Thu, Sep 5, 2019 at 2:26 PM
[Both BioStar] Configuring the Same Wiegand Format of BioStar 1 in BioStar 2
The Wiegand configuration UI in BioStar 1 and 2 are different and may cause some confusion. If you would like to configure your Wiegand format in BioStar 1...
Tue, Jul 3, 2018 at 11:14 AM
[BioStar 2] Wiegand Configuration FAQ
Below are some answers to frequently asked Wiegand Configuration questions Which devices support Wiegand card read?  Prox and iClass cards are Wiegand ...
Wed, Jul 4, 2018 at 10:21 AM
[BioStar 2] Troubleshooting Wiegand output issues
Issue 1.You are using Suprema devices as Wiegand readers for a 3rd party controller and the controller is not receiving any signal from the Suprema devi...
Tue, Mar 13, 2018 at 10:15 AM
[BioStar 2] Wiegand Reader Sample Configuration
When configuring a Wiegand read setup, one device will be the Wiegand input device (receiving the signal) and the other device will be the Wiegand output de...
Mon, Aug 27, 2018 at 2:06 PM
[BioStar 2] Wiegand Legacy Mode for RFID readers in BioStar 2
In BioStar 1 there were two ways you could configure the RFID devices (Wiegand Readers) that were connected to a Suprema device.  Legacy: RF Reader will...
Thu, Apr 5, 2018 at 10:56 AM
[BioStar 2] Wiegand Bypass / Slave Device Wiegand
Below are answers to frequently asked questions regarding bypass mode.  What is the Wiegand Bypass feature?  Bypass is a Wiegand Output mode that is us...
Wed, Feb 28, 2018 at 2:23 PM